First: Make sure you have an Arduino (Nano) with an actual FTDI Chip. If you have an CH340 Chip, this Tutorial will give you headaches! (thanks to pablo braacciale and MITEEman)
You will need these Driver straight from the FTDI Website:
Update 2021:
FTDI does not support this Driver anymore. You can try to use the D2XX Driver, but you are better off using the new link below from the mirror.
Mirror from 6th of October 2014 in case the link will go dead or is altered by FTDI:
[LINK REMOVED JAN 2021]
After 6 Years, the file hoster deleted the file. Here is a new link (January 2021)
CDM v 2.12.00 WHQLCertified:
Some people reported problems with the DRiver resulting in a “Start Code 10 Error” on Win7 and Win8. I have no idea why that happens but Latif Berisha posted a link to another driver source in the comments (+1 him for that). For your convenience, this is his comment:
— “The bricked Arduino will work with no problem using this driver:
”
Mastadex supplied the following information:
” +MNHS Beacon I did some digging and found that the CDM 2.04.16 driver can be used in place of the SmartTronik driver you posted. It appears to have fixed whatever was causing my BSOD earlier. I uploaded the driver here: (link not virus-tested, note by MNHS)
Note that this driver is also WHQL certified and doesn’t produce ‘untrusted driver’ warnings.”
If you want to find out how you can set your Product ID (PID) of your FT232R manually, MrPvallone has a video of the process and the tools to use:
Un-brick the FT232RL FTDI USB Serial Adapter
I hope that this can direct you to solve your problem. As I said: I have no Win8 System on any of my machines. Sorry.
Tag: ft232r usb uart, FTDI, Arduino, Nano, Driver, USB, UART, Windows, Win7, Ebay, China, Update, Brick, Unbrick, Counterfeit
Xem thêm: https://blogthủthuật.vn/category/internet
Nguồn: https://blogthủthuật.vn
Neither of the links to download the drivers are working for me, anyone else have this issue?
Muchas gracias !!!!!!!!!!!!
Dude YOU ARE THE BEST THANK YOU
And if we do have the CH340C chip, then what?
many many thanks
Seriously? A video of you looking at a forum post and no voice?
Vieeelen Dank!!! War schon am Verzweifeln :S
Bei mir konnte ich nicht den USB Konverter auswählen. Habe ihn dann als Port deklariert, funktioniert aber trotzdem.
great video tks for helping
Thanks yo so much. Fixed the problem 😉
i do not see the USB Serial port option when i open the ftdiport.inf
What a genius <3
Did not work for my USB-UART adapter with FTDI FT232RL chip. I downloaded the 2.12.00 drivers directly from ftdi. When selecting the first inf file and then "USB Serial Converter" and then accepting the warning – I got BSOD! Using Windows 10 64-bit.
god damn…
Thank you!
Thanks for your help, but for those who bough from china, here's my advice:
On my arduino nano is installed CH340 instead of FTDI…
I was successfully with the driver from this site:
http://shelvin.de/arduino-dccduino-usb-treiber-installieren/
FAKE FTDI – BADUSB MEANS WE’RE ALL SCREWED (USB stick like cheap Arduino) http://hackaday.com/2014/10/05/badusb-means-were-all-screwed/ or https://youtu.be/nuruzFqMgIw?t=2543
This helped so much! Thank you!!
Thank you so much !!!
Thank you.
It's helpful!!!
Hi Guys, I have this win10 and OSX el capitan problem now. both computers wont recognize the unit.. its not appearing in device manager at all. I tried every driver there is (i think) and different arduino ide versions… i really dont get it. Could somebody please save my sucky life! Crying… eating… crying… eating…
my FTDI232 cant supply 5v power to flash micro minimosd … i tried to use external power with esc and the led was blinking … upload the MWOSD showed a notif said "programmer is not responding … the FTDI led is on but the sketch wasnt uploaded … what can I do
Well i have a very weird problem..I have downloaded the drivers before some months started uploading and everything fine.. and some weeks ago rx stoped blinking green when using MultiwiiConf and cant read data.. Tried your way still the same
in w10 i can´t load the drivers, can you help me?